Cisco, Networking

Set IP router Serial Interface & RIP Routing

Set DHCP on Route A to Client

Router(config)#ip dhcp excluded-add 192.168.1.0 192.168.1.100
Router(config)#ip dhcp pool server
Router(dhcp-config)#network 192.168.1.0 255.255.255.0
Router(dhcp-config)#default-router 192.168.1.1

Set IP Route A

Router(config)#interface Serial2/0
Router(config-if)#clock rate 64000
Router(config-if)#ip address 10.0.0.1 255.0.0.0
Router(config-if)#no shutdown

Set IP Route B

Router(config)#interface Serial2/0
Router(config-if)#DCE gk pake clock rate
Router(config-if)#ip address 10.0.0.1 255.0.0.0
Router(config-if)#no shutdown

RIP

Route A

Router(config)#router rip
Router(config-router)#network 192.168.1.0

Rout B

Router(config)#ip route 192.168.1.0 255.255.255.0 10.0.0.1

Standard

One thought on “Set IP router Serial Interface & RIP Routing

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s