Cisco, Networking

Static Routing

nb: @gambar cuma ilustrasi

  • Router ke router : Serial
  • Router ke switch : FastEthernet (boleh pake Ethernet tapi lebih cepat FastEthernet)
  • Switch ke PC : FastEthernet
  • Konektor yang warna merah menggunakan Serial DCE, jadi saat konfigurasi harus disertakan clock rate 64000. Jika menggunakan Serial DTE tidak perlu clock rate.
  • (recommended) Sebaiknya menggunakan Routers yang Generic (Router-PT) agar kita tidak perlu menambahkan modul pada komponen router.
  • (recommended) Untuk Switches gunakan Generic (Switch-PT)
  • Konfigurasi ini menggunakan CLI (command-line interface)
Cara Konfigurasi Static Routing pada Packet Tracer
Setting router
1.       ROUTER 0 (setting 1 serial, 1 FastEthernet)
Router>en            // enable
Router#conf t        //configure terminal
Router(config)#int fa0/0 //setting interface dari router ke switch
Router(config-if)#ip add 192.168.1.1 255.255.255.0  //setting IP dan subnet mask
Router(config-if)#no shut    //mengaktifkan setting diatasnya
Router(config-if)#ex         //exit
Router(config)#
Router(config)#int s2/0      //setting interface serial di router 0
Router(config-if)#ip add 192.168.4.1 255.255.255.0
Router(config-if)#clock rate 64000      //kecepatan clock
Router(config-if)#no shut
Router(config-if)#ex
1.       ROUTER 1 (setting 2 serial, 1 FastEth)
Router>en
Router#conf t
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#ex
Router(config)#
Router(config)#int s2/0
Router(config-if)#ip add 192.168.4.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
Router(config-if)#ex
Router(config)#
Router(config)#int s3/0
Router(config-if)#ip add 192.168.5.1 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
Router(config-if)#ex

ROUTER 2 (setting 1 serial, 1 FastEth)

Router>en
Router#conf t
Router(config)#int fa0/0
Router(config-if)#ip add 192.168.3.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#ex
Router(config)#
Router(config)#int s2/0
Router(config-if)#ip add 192.168.5.2 255.255.255.0
Router(config-if)#clock rate 64000
Router(config-if)#no shut
Router(config-if)#ex
Cara setting routing :
Router0:
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.4.2 //
Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.4.2Router1 :
Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.4.1
Router(config)#ip route 192.168.3.0 255.255.255.0 192.168.5.2

Router2 :
Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.5.1
Router(config)#ip route 192.168.2.0 255.255.255.0 192.168.5.1

Standard

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s