Linux, Networking, Opensource, Server

Dokumentasi: Samba Debian

Windows Ready to share.

OS. Debian Ready

  1.  gnome-commander
  2. samba allready shared

Installing SWAT DEBIAN

#apt-get install swat xinetd

#nano /etc/xinetd.d/swat

service swat
{
port            = 901
socket_type     = stream
wait            = no
only_from       = 192.168.56.101/24
user            = root
server          = /usr/sbin/swat
log_on_failure  += USERID
disable         = no
}

#xinet.d restart#Samba restart

>>Pict Gnome-Commander

gnome-commander

 

 

Standard
Cisco, Networking

Membuat Simulasi Jaringan VLAN

Inisialisasi

  1. Vlan 100 lab_a
  2. Vlan 200 lab_b

Perintah Switch

  • Switch>enable
  • Switch#vlan database
  • Switch(vlan)#vlan 100 name lab_a
  • Switch(vlan)#vlan 200 name lab_b
  • Switch(vlan)#exit
  • Switch#sh vlan

Setting lagi Switch nya

  • Switch#configure terminal
  • Switch(config)#interface fa 0/1
  • Switch(config-if)#switchport access vlan 100
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/2
  • Switch(config-if)#switchport access vlan 100
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/3
  • Switch(config-if)#switchport access vlan 100
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/4
  • Switch(config-if)#switchport access vlan 100
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/5
  • Switch(config-if)#switchport access vlan 100
  • Switch(config-if)#exit
  • Switch>enable
  • Switch#configure terminal
  • Switch(config)#interface fa 0/11
  • Switch(config-if)#switchport access vlan 200
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/12
  • Switch(config-if)#switchport access vlan 200
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/13
  • Switch(config-if)#switchport access vlan 200
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/14
  • Switch(config-if)#switchport access vlan 200
  • Switch(config-if)#exit
  • Switch(config)#interface fa 0/15
  • Switch(config-if)#switchport access vlan 200
  • Switch(config-if)#exit
  • Switch(config)#exit
  • Switch#sh vlan

Configurasi Router

Router>enable

  • Router#configure terminal
  • Router(config)#interface fa 0/0.100
  • Router(config-subif)#encapsulation dot1q 100
  • Router(config-subif)#ip address 172.16.10.254 255.255.0.0
  • Router(config-subif)#exit
  • Router#configure terminal
  • Router(config)#interface fa 0/0.200
  • Router(config-subif)#encapsulation dot1q 200
  • Router(config-subif)#ip address 192.168.1.254 255.255.255.0
  • Router(config-subif)#exit
  • Router(config)#interface fa 0/0
  • Router(config)#no shutdown

Configurasi Swicth [Trunk]

Switch>enable

  • Switch#configure terminal
  • Switch(config)#interface fa 0/24
  • Switch(config)#switchport mode trunk
  • Switch(config)#exit

Hasil Cek Koneksi

Standard